|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | Yes |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Pure sine wave solar inverter
2. Rated Power:6200W
3. System DC Voltage:48Vdc
4. PV MPPT Voltage Range:85Vdc ~ 450Vdc
5. PV Max. Power:3100W*2(4000W Single-Tracker) 2 channels of input/output 2 channels of full-load output
6. Operate without a battery
7. Parallel operation up to 6 units
8. Overload capacity: >150% for 5 seconds then shutdown, 110%-150% for 10 seconds then shutdown, <110% for continuous operation
9. The homepage of the APP refreshes in real time
10. The function of power generation statistics
11. Smart battery charge design to optimize battery life
12. Can running three three-phase output
GYOPO all-in-one 6000W hybrid solar charge inverter, which integrates solar energy storage, means charging energy storage and AC sine wave output, DSP control and advanced control algorithm, MPPT Charging and Inverter DC power to AC power in one mechine.Parallel function, Reserve the plan for the subsequent increase in electricity consumption;Support wiring in Parallel up to six unit, which means max handle 6500W*6 solar and output 6000W*6 ac power output system.
| Model | OHP-MAX-6.2KW |
| Rated Power | 6200W |
| System DC Voltage | 48Vdc |
| PV Specification | |
| Max. Power | 3100W*2(4000W Single-Tracker) |
| Max. PV Array Open Circuit Voltage | 500Vdc |
| Nominal PV Voltage | 340Vdc |
| Start-up Voltage | 60±7V |
| Start Charging / Inverter Voltage | 85±7V |
| PV MPPT Voltage Range | 85Vdc ~ 450Vdc |
| Number of MPP Trackers | 2 |
| Max. DC Input current | 16Amp*2 |
| PV Voltage Accuracy | +/-2V |
| AC Input Specification | |
| Nominal Input Voltage | 230Vac |
| Low Loss Voltage | 170Vac±7V(UPS); 90Vac±7V(Appliances) |
| Low Loss Return Voltage | 180Vac±7V(UPS); 100Vac±7V (Appliances) |
| High Loss Voltage/Return Voltage | 280Vac±7V/270Vac±7V |
| Max AC Input Voltage | 300Vac |
| Nominal Input Frequency | 50Hz / 60Hz (Auto detection) |
| Low Loss Frequency/Return Frequency | 40±1Hz/42±1Hz |
| High Loss Frequency/Return Frequency | 65±1Hz/63±1Hz |
| Max. AC Input Current | 27Amp |
| Rating of Transfer Relay | 40Amp |
| Battery Mode Specification | |
| Waveform | Pure Sine Wave |
| Nominal Output Voltage | 230Vac |
| Nominal Output Frequency | 50/60Hz auto sensing |
| Output Voltage Distortion | <3% for linear load, <5% for non-linear load @ V nominal |
| Output DC offset | <150mV |
| Peak Efficiency | 93% |
| No Load Power Consumption | <70W |
| Transfer Time | 10ms typical 20ms MAX @Single|<30ms @ Parallel |
| Output Parallelled | Maximum 6 units for single-phase, maximum 2 groups for three-phase. |
| TWO LOAD OUTPUT POWER | |
| Full Load | 6200W |
| Maximum Main Load | 6200W |
| Maximum Second Load(battery mode) | 6200W |
| Overload Capability Specification | |
| Line Mode | Breaker, short-circuits |
| Battery Mode | 5sec, @>150% Load |
| 10sec, @110%~150% | |
| 4-cycle, short-circuits | |
| Battery & Charger Specification | |
| Nominal DC Voltage | 48Vdc |
| Cold Start SOC(Li Mode) | Default 30% ,Low DC Cut-off SOC +10% |
| Cold Start Voltage(Lead-Acid Mode) | 46.0Vdc |
| Low DC Warning Voltage(Lead-Acid Mode) | |
| @ load < 20% | @20%<load <50%| @load > 50% | 44.0Vdc | 42.8Vdc|40.4Vdc |
| Low DC Warning Recovery Voltage(Lead-Acid Mode) | |
| @ load < 20% | @20%<load <50%| @load > 50% | 46.0Vdc | 44.8Vdc|42.4Vdc |
| Low DC Cut-off Voltage(Lead-Acid Mode) | |
| @ load < 20% | @20%<load <50%| @load > 50% | 42.0Vdc | 40.8Vdc|38.4Vdc |
| Low DC Cut-off Voltage(Li Mode) | 42Vdc |
| Low DC Warning SOC (Li Mode) | Low DC Cut-off SOC -5% |
| Low DC Warning Return SOC (Li Mode) | Low DC Cut-off SOC +10% |
| Low DC Cut-off SOC (Li Mode) | Default 20% ,5%-50% Settable |
| High DC Cut-off Voltage | 60.8Vdc |
| Max. AC Charging Current | 80Amp |
| Max. Solar Charging Current | 100Amp |
| Max. Charging Current | 100Amp |
| Absorption Charging Voltage | 56.4Vdc(C.V Charger Voltage) |
| Floating Charging Voltage | 54.0Vdc |
| Communications | |
| Dry-Contact Signal | Activated when battery lower than pre-alarm level |
| WiFi/RS485&CAN-BUS port for BMS | Standard |
| Environmental | |
| Operation Temperature Range | 0ºC to 55ºC |
| Relative Humidity | 5% to 95% Relative Humidity (Non-condensing) |
| Altitude | <2000m |
| Cooling | Forced Air |
| Warranty | 24-Month Non-Human-Induced Warranty |
| Certification | CE/ROHS/ISO9001/ISO14001/ISO45001 |
| Mechanical Specification | |
| Housing Dimension (L*W*H), mm | 450x417x132 |
| Net Weight, kg | 12 |
1. Who are we?
){kind=link}